The lint can get on the floor while cleaning and you will want to make sure to collect this as well. If left to collect on the floor, this may also cause a fire hazard. The inside of the vent must be completely vacuumed and cleaned. But you cannot use just any vacuum to remove the lent. The vacuum should be made for dryer cleaning.

Talk to your supplier about the type of wood/fuel burner you need and about the flue liner you need to serve it. The efficiency of the fire will depend on putting the right wood burner into the right opening and using the correct flue. If they do not all match up you could be wasting a great deal of energy.

hvac cleaning Condenser Tubes: Inspect and Clean the condenser tubes. If this task should be scheduled before warm temperatures arrive. At SML, we schedule this work to be done in February and March. Don't over brush. If water treatment program is handled with care, then minimal cleaning is required.



People assume that with new construction standards and an overall reduction in outdoor air quality, the quality of your air inside the house should be better. Unfortunately, this is not true. In our efforts to reduce energy costs and waste, builders and manufacturers have been working together to create more efficient ways to keep a home airtight. We now have windows that keep heat in the house during the winter and the cold air in during the summer. We also have equipment that can help detect leaks in the house and to plug them. Insulation, moisture barriers and waterproof basements along with much-improved seals around windows and doors have created a house that no longer breathes.

To get started with your chimney cleaning project, spread the tarp at the bottom floor of your chimney. Make sure the trap also covers surrounding floor areas nearby. Open the damper which is the metal door up inside your chimney. It keeps cold air out when your fireplace is not in use. Now, climb up your roof with your rods and brushes. Remove the spark arrestor or chimney cap and check it for weather damage.

When using the dryer vent cleaning kit to clean your equipment, it is vital to first remove it from the socket before beginning the process. This is very important as it will save you from the risk of being electrocuted. Disconnect the hose from the wall socket. Also use your vacuum cleaner to remove any lint that may clog in the machine. While you are at it, the lint might fall to the floor and don't allow it to stay on the floor as it might result in a fire hazard.

Now there is a simple solution. Having a skilled chimney sweeper clean and inspect your chimney every year will cut this problem from ever happening to you. In fact your insurance may even cost less per year if you have this service done. Check with your insurance agency to see if this could save you some money.

The duct likely goes from the back of your dryer directly through the wall of the house to the outside. Once you've disconnected the duct, take it outside so lint doesn't get all over everything. Use a shop vac or a regular house vacuum to vacuum the duct out from each end. If you don't have a vacuum, you can tie a toilet brush to a rope and pull it through the vent. This method does a pretty good job.