Though fireplaces serve as a wonderful asset to any home, many things can still go wrong. First of all, the chimney and the flue must be clean. All fireplaces require an adequate source of flowing Air Guys LLC to feed the fire and a means to expel the smoke and fumes. The longer the smoke stays in the chimney, the more creosote builds up.

Wrong. Even though your new furnace is clean, there is still dust in your ducts. And, because the fan on your new furnace is probably more powerful than the old one, all that dust and dirt is going to be blown straight into your rooms! Most hvac cleaning specialists recommend a complete ductwork cleaning in tandem with any new furnace or air conditioner installation.



Make sure you check the outer edges of the vent and the hose, as this is where most of the buildup will be. Look through the vent and tube to see if you missed anything before you re attach the dryer vent clamp. To complete a dryer vent cleaning, run your dryer for about ten minutes with nothing inside. This clear the machine of any debris left over from the cleaning.

But why then are the evaporator (inside) coils so important for energy efficiency? The evaporator coils can be several rows deep. As we saw, when the hot humid air passes over the cold coils the moisture is constantly condensing on these coils. The moisture on the coils makes them a perfect medium for picking up the dirt and debris in the air. The moisture and soil on the coils and in the condensate pan, where the water flows to, also provides a perfect condition for microbial growth. As the dirt and debris build up on the several rows of coils, two things happen.

Now when their are 7 companies out of 10 that do not do things the right way of course the industry is going to end up with a bad name. I want you all to know we are not all crooks and thieves. I know many chimney sweeps personally who take pride in their work. The problem is you need to find such an individual to do a chimney cleaning and inspection on a yearly basis to your chimney.

There are four main concerns dealing with a dryer: fire hazard, excessive energy costs, mold development and carbon monoxide seepage (from gas operated dryers).

The lint can get on the floor while cleaning and you will want to make sure to collect this as well. If left to collect on the floor, this may also cause a fire hazard. The inside of the vent must be completely vacuumed and cleaned. But you cannot use just any vacuum to remove the lent. The vacuum should be made for dryer cleaning.