Paint shop owners need to keep their operations economical and competitive. Therefore, it is important to shorten the drying and holding time of the painted products. The key to success is the optimization of processes and the judicious use of available technologies, especially drying chambers https://krostauto.ru/. Traditional spray booths and dryers are standard equipment in every body shop and paint shop. In such boxes, the accelerated drying process occurs due to the heating of the air in the cabin.

There is no doubt that infrared (IR) drying is significantly more cost effective than conventional air drying. Manufacturers report cost savings of 50% or more, depending on the application. In traditional drying, all the air in a relatively large spray booth must be constantly heated or kept within specific temperature ranges. Paint booths are the best solution for these tasks.

Installation purpose

Painting booths are used for coating all kinds of products with paint and varnish spraying and their subsequent drying. It can be:

● plastic and metal components for vehicles;
● medical equipment;
● prefabricated structures;
● individual elements, etc.

In the chambers, as a rule, manual coating is carried out using spray guns by a painter. After several painting processes, the components are transferred to an adjacent drying chamber. Drying takes place at a temperature of approx. 40 ° C (max. 80 ° C).

Requirements for the operation of spray booths

High flexibility in the handling of components and clean room conditions for cab technology are a must. Equally important is the possibility of retrofitting an overhead conveyor system in painting and drying booths. It also requires the installation of the necessary ventilation equipment at the sites for the equipment used for painting.

The spray booths are equipped as pass-through, with double-sided suction of excess spray through the wall and directed air supply from above through the ceiling of the supply air filter, as well as with a pressure equalization regulator. The steel structure cab concept is designed to integrate platforms with equipment as well as retrofit a manual overhead conveyor system.