Place a thin darkened triangle ("bumper shroud") ahead of the front tire. Step 4: For side lights, place one small rectangle near the front of the car and an even smaller rectangle by the rear. Use a small slanted box to form the windshield. Above this structure, form the windshield and side windows using two slanted rectangles. Draw a straight line below the dark areas in the side windows. On top of the right half of the rectangle, draw a smaller rectangle with slanted sides to form the driver’s-side windows.

Step 1: Draw a long rectangle for the driver’s side of the car. Step 1: Draw the passenger’s side of the car as a large rectangle with a slanted right side and two ovals for wheels. Sketch two circles for the wheels. Add curved lines around the wheels and along the bottom of the car to form the running board and fenders.

Step 2: Sketch a curved line to form the roof. Step 2: Using gently curved lines, show the rounded shape of the front end, front hood, windshield, and roof.

Under the front end of the car, form the third wheel using a half circle and a curved line. Place a half circle above the front tire to form the wheel well. Put an incomplete circle inside the large rectangle for the spare tire. Form the door handle using a small rectangle with a black bottom half. Draw tiny thin rectangles for the door handles. Behind the front tire, draw two upright rectangles that are curved. From the bottom of each tire, draw a straight line that curves upward to show the width of the tire.

Step 3: Add the sideview mirror by using an odd-shaped oval with a curved line under it. Use several curved lines and an oval to show the folding headlight covers and to finish the front hood. For the wheels, use a circle and an oval that overlap the rectangle. Form each hubcap using a small circle inside of a larger circle.

Step 3: Add hubcaps to each of the three tires by drawing a small circle within a larger circle. Step 5: Draw a straight line between the tires near the bottom of the side of the car.

From right to left, sketch one straight line inside the side window. Above and to the left of the rear wheel, add a short straight line to show the bottom edge of the rear driver’s-side window. Add an upside-down L-shaped figure for the rear bumper. Add two more diamond-shaped figures for the front hood and the front end of the car. Draw a short curved line for the rounded bottom corner of the front end. Step 4: Place four short upright lines in front of the spare tire.

Step 5: Sketch the upper side moldings using four straight lines and one tiny curved line along the top part of the body. Continuing as the base powerplant was the 2.0-liter 88-horsepower four with throttle-body injection, now rated at 88 horsepower. Meanwhile, a compression boost hiked output of the base engine to 75 horsepower. Whether your camera is moving or stationary, you'll want to keep it steady with a tripod or other stable base.